Rubber Mining Screen ( Sieve , Screening )

We Provide Rubber Mining Screen Of 1 Inch x 1 Inch To 1 Inch x 4 Inch, Designed To Replace Existing Square-Hole Sieves With Open Areas Equal To Or Larger Than The Current Sieves But With Superior Performance.
Compared With The Polyurethane Screen, The Wear And Blockage Of The Black Rubber Screen Increased.
Mining Screen Options: Snaps, Pins And Legs, Bolt Connections And Pins And Sleeves.
Benefits:
Rubber Screen For Mining Is Easy To Install And Move On Deck To Maximize Wear Life.
Various Shaping Tapered Holes Provide Effective Screening To Reduce Blockage And Blockage.
Rubber Compounds Tested In Laboratory Have Long Service Life And Protection Against Impact, Cutting, Tearing And Wear.
Rubber Mine Screens Greatly Reduce Noise Levels Compared With Steel And Wire.
Customization Can Be Made To Maximize Product Efficiency.
Key Performance:
1. Good Wear Resistance And Long Service Life. Its Wear Resistance Is 3-5 Times That Of Steel Mining Sieve Plate.
2. Maintenance Is Simple, Rubber Network Is Not Easy To Damage, Long Service Life, Can Greatly Reduce Maintenance And Downtime Maintenance Losses.
3. The Total Cost Is Very Low. The One-Time Investment Of Rubber Mining Sieve With The Same Size (Area) Is Higher Than That Of Stainless Steel Mining Sieve Plate (About 2 Times), But The Total Cost Is Not High, Because The Service Life Of Rubber Sieve Is 3-5 Times Longer Than That Of Stainless Steel Mining Sieve Plate, And The Maintenance And Replacement Time Is Shorter. Es Is Relatively Small, So It's Very Economical.
4. Good Moisture-Proof Performance Makes It Work Under Water As A Medium. In Water, Oil And Other Media, The Friction Coefficient Between Rubber And Material Decreases, Which Is More Conducive To Screening, Improving Screening Efficiency And Avoiding The Adhesion Of Wet Particles. In Addition, The Service Life Is Increased Due To The Reduction Of Friction Coefficient And Wear.
5. Antiseptic, Non-Flammable, Non-Toxic And Tasteless.
6. Reasonably Designed Mining Sieve Mesh And Unique Manufacturing Process Of Mining Screen Do Not Allow The Ultimate Size Of Particles To Block The Mining Mesh.
7. Good Vibration Absorption Performance And Strong Noise Elimination Ability Can Reduce Noise, And Also Make The Material On The Screen Not Easy To Crush In The Process Of Vibration.
8. Because Rubber Mining Screen Has The Characteristics Of Secondary Vibration, It Can Be Cleaned By Itself, So The Screening Efficiency Is High.
9. Energy Saving And Consumption Reduction. Rubber Has A Small Proportion And Is Much Lighter Than Steel Mining Wire Mesh Of The Same Size, Which Reduces The Load Of The Screen, Saves Energy Consumption And Prolongs The Service Life Of The Screen.