Polyurethane Molded Casting Screen ( PU , Urethane ) Sieve Screening

Polyurethane Molded Casting Screen Adopts High-Performance Cast Alloy Steel As The External Dimension Mold, And The Open Casting Process Solidifies The Polyurethane Elastomer; The High-Temperature Vulcanization Of The Vulcanizing Tank Processes Its Physical Properties; The Insulation Design Of The Insulation Box Lasts For Four Hours. The Die Net Produced By This Method Has Very Good Performance, As Follows:
Long Service Life And Big Bearing Capacity
Polyurethane Casting Screen Plate Uses Wire Rope As Skeleton Material.
The Polyurethane Itself Has Very High Modulus Of Elasticity, High Strength Absorption, Impact Resistance And High Wear Resistance.
So It Has Very High Tensile Strength
Bearing Capacity Is More Than 2.5 Times More Than The Rubber Screen.
Service Life Is 8-10 Times Higher Than That Of Ordinary Metal Screen Plate, 3 Times That Of Stainless Steel Screen And 3.9 Times Of Natural Rubber.
Best Wear-Resistant Material Of The Screen In The World
Production Material Of Casting Screen Is Polymer Elastomer.
It Has Abrasion Resistance, Flexural Resistance And Bearing Capacity.
Raw Material Of Polyurethane Casting Screen Has Undergone Special Treatment.
Never Delaminate Under The Action Of Long Term Alternating Load.
Efficiency Is High.
Internal Self Cleaning Performance Of Screen Surface
No Hole,
Sieving Efficiency Is High.
Permeability Of Polyurethane Is Strong.
Cone Angle Of The Screen Is Large (140 Degrees).
Prevent The Adhesion Of Wet Fine Particles.
It Is Suitable For Screening And Grading Of Wet Fine Particles.
Polyurethane Elastomers And Their Good Tensile Properties.
Effectively Avoid The Plugging Phenomenon In The Dynamic Condition.
Wide Application Scope And Strong Professional Applicability.
Urethane Casting Screen Is Suitable For Any Type Of Vibrating Screen And Can Be Made By Measuring Machine.
It Is Used In Hydropower Stations, Building Materials And Metal Mining Industry.
Screening Of Various Materials In The Range Of 0.1mm - 170mm
Dry Screen And Wet Screen Have No Effect On Screening Efficiency.
The Dewatering And Debinding Screen In The Range Of 0.5m 3mm Shows The Superiority Of The Polyurethane Mould Screen Surface More Fully.
Casting Screen Is Water Resistant, Corrosion Resistant And Aging Resistant.
It Is Convenient To Replace And Maintain.
Density Of The Polyurethane Is Small (1.32kg/ m 3).
The Weight Is Lighter Than The Metal Screen.
Can Reduce Production Single Consumption,
PU Casting Screen Can Meet The Requirements Of Large-Scale Development Of Screen Machine.