Rubber Mining Panels Wear Resistance Produced By Our Company Is Very Remarkable. The Reason Why Our Mining Panels Uses Black Rubber Material Is That We Also Value The Wear Resistance Of Rubber. The Wear Resistance Of Rubber Mine Panels Is About Twice As Good As That Of Natural Wear-Resistant Rubber In The Range Of 0.03~0.20m 3/m.
In Practical Application, The Effect Of Rubber Mining Panels Is Often Better When The Panel Is Sprayed With Lubricant. Wear Resistance Is Closely Related To Tear Strength And Surface Smoothness Of Rubber Materials.
The Tear Strength Of Rubber Mining Panels Is Much Higher Than That Of Other Carbon Steel, But The Friction Coefficient Of Mining Panels Itself Is Not Low, Generally Above 0.5. This Requires Attention To Adding Lubricating Oil, Or Adding A Small Amount Of Graphite Or Molybdenum Disulfide, Silicone Oil And Polytetrafluoroethylene Powder In Practical Use, In Order To Reduce The Friction Coefficient And Reduce The Damage Caused By Friction To The Mining Panels.
The Friction Coefficient Of Rubber Mining Panels Is Also Related To The Hardness And Surface Temperature Of The Material. In All Cases, The Friction Coefficient Increases With The Decrease Of Hardness And The Increase Of Surface Temperature.
The Maximum Operating Temperature Is About 60 Degrees Celsius. Therefore, Rubber Panels In The Use Process Need To Keep Cooling At All Times. In Order To Increase The Service Life Of The Screen Plate.
16633372827