Rubber Dewatering Screen Deck Holes / Mesh Width Is Slightly Larger, Generally Between 1mm And 4mm. Because The Rubber Screen Is Mainly In The Anhydrous Environment, The Dry Solid Particles Are Separated. Therefore, The Mesh Generally Presents a Long Strip State. According To The Characteristics Of The Structure, It Can Be Divided Into Two Types: Pure Rubber Screen Deck Without Framework And Steel Framework Rubber Screen Deck.
High Wear Resistance :
The Wear Resistance Rubber Surface Supplies An Outstanding Wear And Impact Resistance Performance. The Rubber Screen Deck Can Maintain a Good Condition During The Frequent Usage, In Addition, It Can Also Ensure The Durability And Long Service Life Of Screen Deck.
Smooth Surface :
The Rubber Sieve Deck Has a Smooth Surface Compared To Woven Sieving Screens. The Smooth Surface Can Reduce Pegging And Blinding. Additional, The Various Aperture Types Can Fit Different Materials, So It Can Improve The Screening And Separating Efficiency.
Flexible :
Flexible Is The Most Outstanding Feature Of Rubber Dewatering Screen . It Has Various Connection Types, Which Can Supply Easy And Fast Installation And Fixation. The Interlocking System Of Rubber Dewatering Sieve Is Superior To The Bolting Connection Type. Besides, The Interlocking System Make The Replacement Of Worn Screens Be Fast And Need No Efforts.
Various Application :
The Rubber Dewatering Deck Has Various Aperture Sizes And Types, Which Can Be Used For Different Sizes Of Materials As Well As Wet Or Dry Materials.
In Addition, The Rubber Screen Deck Has Various Connection Types Which Can Be Installed Onto Various Dewatering Screens, Crushers And Trommels.
Normally, The Rubber Screen Deck Will Not Be Damaged Within One Year. But When The Service Life Of The Screen Deck Expires, How To Replace The Screen Deck ? What Should We Pay Attention To In The Exchange Screen? The Following Is A Detailed Introduction Process:
1. After The Screen Deck Frame Is Assembled Into The Screen Box According To The Requirements, Keep In Mind That The 50-70mm Screen Deck Cut Out Should Be Extended Into The Corresponding Outlet To Prevent Mixing Phenomenon.
2. When Cutting, To Keep The Width Of Screen Deck Consistent With The Grid, The Length Of The Screen Must Be 50-70 Mm Longer Than That Of The Screen Deck.
3. Screen Device Must Be Tightened, Because The Tightening Of Screen Is An Important Factor Affecting The Power Of Screen Deck.
4. When Installing Net-Clearing Bouncing Balls, We Must Pay Attention To The Difficulty Of Screening Materials And The Number Of Eyes, Not Blindly Install Them.
5. If The Material Proportion Is Large Or The Mesh Number Of The Screen Deck Device Is High, The Appropriate Mesh Number Should Be Added Under The Screen. The Purpose Is To Play A Supporting Effect, Reduce The Pressure Of The Material On The Screen And Extend Its Service Life.
6. When Installing The Screen Deck Press Plate, We Must Pay Attention To Its Smoothness And Lock It Evenly With a Strong Retractable Sponge Seal Belt, Because This Is Not Only The Key To Eradicate The Outbreak Of The Mixing Stage, But Also An Important Factor Affecting The Service Life Of The Rubber Screen Deck.
16633372827