Polyurethane Slot Screen ( PU , Urethane ) Sieve Screening

Polyurethane Slot Screen Can Be Used For Many Years Without Damage, And The Working Environment It Uses Is Generally Worn-Out Machinery And Equipment, And The Strong Wear Resistance Of Polyurethane Itself Can Solve This Problem. Generally Speaking, The Higher The Wear Resistance, The Lower The Replacement Frequency And The Higher The Work Efficiency.
If The Wear Resistance Of a Slot Screen Is Very Strong, It Will Not Be Replaced During The Whole Working Process, But This Is Only The Ideal State. The Polyurethane Slot Screen Supplied By Our Company Can Prolong The Service Life More Effectively And Reduce The Cost Of Maintenance And Replacement Parts. The Flexibility Of Polyurethane Polymer Improves The Wear Resistance, Thus Counteracting Some Impact Energy Transmitted By Vibration Medium.
Tear Strength:
Urethane Slot Screen Polymer Raw Materials Have a Strong Tear Strength, Under External Pressure, Generally Will Not Be Material Impact And Tear.
Easy To Cut:
In The Working Environment Of Slot Screen, It Is Usually Produced As a Standard Part Of a Specific Size Because Of The Different Sizes And Specifications Of Each Machine And Equipment. Therefore, In Order To Facilitate Use, The Slot Screen I Work With Can Be Cut Into Various Sizes And Specifications According To Actual Needs, Without Affecting The Normal Performance.
Reduce Noise Pollution:
Generally Speaking, Although The Overall Size Of The Slot Screen Can Be Cut, But The Slot Screen Aperture And Spacing Are Fixed And Can Not Be Changed At Will. In The Production Process, Our Company Needs To Make Specific Mesh Shape, Size And Density According To The Size And Density Of Materials Used. In Order To Achieve The Best Work Efficiency And Maximum Ability To Reduce Working Noise.
Mesh Is Not Easy To Clog:
The Biggest Problem In Screening Is The Clogging Of Slot Screen Mesh. Our Company's Slot Screen Can Easily Solve This Technical Problem. On The One Hand, Polyurethane Elastomer Itself Has Very Strong Elasticity, The Impact Of Large Particles Larger Than Meshes On The Surface Of Polyurethane Slot Screen Will Generally Be Bounced Off, And Small Particles Will Be Screened Successfully; On The Other Hand, The Mesh Holes Of Slot Screen In Our Company Are Generally Conical Holes, Conical Holes Are Different From General Vertical Holes, Reducing The Probability Of Material Being Stuck.
In Addition, Polyurethane Material Is Different From Metal Slot Screen In That It Is Not Rusty. Metal Slot Screen Can Not Avoid Rusting Problem And Corrosive Reaction With Material Chemicals. The Polyurethane Will Not React With The Material, Thus Avoiding The Slot Screen Rupture Due To Corrosion. The Plasticity Of Polyurethane Itself Makes It Have Strong Vitality, And It Can Still Be Used Normally After More Than Ten Years Of Reasonable Storage.
Mesh Hole Can Be Designed And Produced At Will:
Slot Screen Belongs To Die Pressing Forming, The Size And Shape Of Mesh Hole Depends On The Shape And Size Of The Die. The Hole Shape Of Metal Welded Screen Is Generally Square. Although The Hole Of Metal Punched Screen Can Be Customized Into Various Shapes And Sizes, The Thickness Of Metal Plate Is Generally Not Too Thick. The Mesh Size, Shape And Thickness Of Polyurethane Slot Screen Can Be Easily Customized.